Non Standard Plastic Angles

TP Extrusions has a range of tooling for specialist plastic angle profiles. These include several sections for non slip stair nosing, where the stair tread or riser is capped and edged with a notched plastic angle, which serves as a protector for the step as well as being anti slip. There are also acute angled sections - please see the comments and features in the table below, and drawings of the profiles further down, for full details.

Please note that custom runs of the profiles below can be run in different materials, a full range of colours and cut to the required length. Please contact us to discuss specialist Plastic Angle production details.

Please click through for Plastic Unequal Angles.
For details of our 90 degree Equal Angle click through.

  Dimensions in mm    
Ref A B C Features Comments
TP02 2134 20 8 1/1.5 Small leg 1.5mm thick rigid pvc, abs
TP02 2135 28 6 1/1.5 Small leg 1.5mm thick rigid pvc, abs
TP02 2136 19 19 2 Hooked ends and angle rigid pvc, abs
TP05 1003 30 30 1.5 3 notches and tapered rigid pvc, abs, styrene
TP05 1009 44.5 44.5 3 7 notches rigid pvc, abs, styrene
TP05 1076 22 22 3 2 notches and tapered rigid pvc, abs, styrene
TP05 1798 50 50 5 82 degree rigid pvc, abs, styrene
TP05 1893 89 39 2 50 degree, radiused rigid pvc, abs, styrene
TP05 1906 19 13 2 57 degree, notched rigid pvc, abs, styrene
TP05 1907 24 14 2 33 degree, notched rigid pvc, abs, styrene

Click on a thumbnail image for a larger version: