Special Plastic Tubes
TP Extrusions has tooling available for a variety of unusual and non-standard tubes which have been designed for particular applications. Please see the details and drawings below for specifics. If the profile shape, dimensions or features you are interested in are not included, we will be able to make tooling for you - contact us to discuss and for Plastic Tube tooling details.
Note that apart from some of the oval tubes, these profiles are not stocked but are run to order and subject to minimum order quantities. This enables us to cut to lengths, to your instructions, of up to 4m.
If you require round, square, rectangular or flexible tubing, click through.
Oval Tubes
Oval tubes have several standard uses, such as Electrical Conduit and athletics Hurdle Rail bars. It is possible in some cases to run with different wall thicknesses, as well as a choice of colour and plastic material.
-
| |
Dimensions in mm |
|
| Ref |
A |
B |
C |
Materials/Comments |
| TP08 0079 |
14.3 |
10 |
0.8 |
STOCK rigid pvc |
| TP08 0080 |
22 |
11.2 |
1 |
STOCK rigid pvc |
| TP08 0081 |
28.8 |
11 |
1.2 |
STOCK rigid pvc |
For details of Oval tubing pack sizes, colours and prices, please visit our sister site Stock Plastic Profiles Tubes Page
| |
Dimensions in mm |
|
| Ref |
A |
B |
C |
Materials/Comments |
| TP05 T254 |
13 |
8 |
1-1.5 |
UPVC, ABS, HIPS |
| TP05 T255 |
17 |
10 |
1-1.5 |
UPVC, ABS, HIPS |
| TP05 T256 |
22 |
12 |
1-1.5 |
UPVC, ABS, HIPS |
| TP05 T257 |
29 |
12 |
1-1.5 |
UPVC, ABS, HIPS |
| TP02 T260 |
54 |
9.5 |
1.75 |
UPVC, ABS, PP, Polythene |
| TP05 1890 |
60 |
20 |
1.5 |
UPVC, ABS, HIPS - 4 internal lugs |
| TP07 0124 |
70 |
20 |
3 |
UPVC, ABS, HDPE, PP, PC, Styrene |
Click on a thumbnail image for a larger version:
TP05 1890
Ribbed Tubes
These tubes are also known as fluted tubes, towel or grab rails, and can be used in conveyor belt type applications. It is possible for some ribbed tubing to be run in different wall thicknesses to suit your requirements.
-
| |
Dimensions in mm |
|
| Ref |
A |
B |
C |
Materials/Comments |
| TP02 T250 |
14.2 |
- |
1+ |
UPVC, ABS, PP, Polythene |
| TP02 T251 |
16 |
- |
1+ |
UPVC, ABS, PP, Polythene |
| TP07 0123 |
19.23 |
16.4 |
- |
UPVC - 2 internal lugs each 0.75mm |
| TP02 T252 |
35 |
- |
1+ |
UPVC, ABS, PP, Polythene |
| TP02 T253 |
36 |
- |
1+ |
UPVC, ABS, PP, Polythene |
| TP05 T258 |
57.1 |
50.8 |
- |
UPVC |
| TP05 T259 |
62 |
50.8 |
- |
UPVC |
Click on a thumbnail image for a larger version:
TP05 T258
TP05 T259
Split Tubes
There are two types of split tube, which are made using different methods.
a) Unless specified, the split tubes listed in the table below are made from dedicated tooling and resemble a tube with a small piece missing. Unlike hollow tubes, these are not made using a vacuum collett and cannot be made to variable wall thicknesses. They can be used as clip-on covers and sheaths.
b) It is also possible to make split tubing by extruding a hollow tube onto a blade which creates the split. For practical reasons this requires that the wall of the tube is thin (max 1mm), but means that many of the round tube sizes can be split during extrusion. For more information on this method please contact us and for tube sizes see our Round Tubes pages.
-
| |
Dimensions in mm |
|
| Ref |
A |
B |
C |
Materials/Comments |
| TP02 T263 |
5 |
1.8 |
1 |
UPVC, ABS, PP, Polythene |
| TP05 1567 |
9.8 |
5.8 |
- |
UPVC, ABS, HIPS |
| TP02 T265 |
10 |
8 |
4 |
UPVC, ABS, PP, Polythene |
| TP02 T266 |
17 |
13.5 |
10 |
UPVC, ABS, PP, Polythene |
| TP02 T268 |
18/7 |
16/5 |
5 |
UPVC - Oval (see dwg) |
| TP05 1738 |
18 |
13.5 |
2.2 |
UPVC, ABS, HIPS |
| TP02 T267 |
18.5 |
15.9 |
10 |
UPVC, ABS, PP, Polythene |
| TP07 T261 |
19 |
18.4 |
0.5 |
UPVC - split during extrusion (curls over) |
| TP02 T264 |
21 |
18.2 |
10 |
UPVC, ABS, PP, Polythene |
| TP07 T262 |
25 |
21 |
1 |
UPVC, ABS, HDPE, PP, PC, Styrene |
| TP05 1436 |
26 |
20 |
10 |
UPVC, ABS, HIPS |
| TP03 0117 |
27 |
25 |
1 |
PP - split during extrusion |
| TP05 1968 |
27 |
25 |
7.5 |
UPVC, ABS, HIPS |
| TP03 0161 |
32 |
30 |
1 |
PP - split during extrusion |
| TP03 0194 |
34 |
32 |
1 |
PP - split during extrusion |
| TP05 1945 |
50 |
40 |
10 |
UPVC, ABS, HIPS |
Click on a thumbnail image for a larger version:
TP05 1945
TP02 T264
TP05 1738
TP02 T268
TP05 1968
TP05 1567
TP05 1436
Miscellaneous Tubes
The following plastic tubes have been developed for very specific purposes. They illustrate the type of plastic tubing that can be produced to order. Please see the relevant drawings for each tube for more details.
| Ref |
Description |
Materials |
| TP01 0162 |
8mm Shotgun Tubing |
UPVC |
| TP02 0132 |
26.5mm Hexagonal Tube |
UPVC, ABS, HDPE, PP, PC, Styrene |
| TP02 2023 |
22.6mm Pentagonal Tube |
UPVC, ABS, HDPE, PP, PC, Styrene |
| TP02 T269 |
22.8mm Flat Base Tube |
UPVC, ABS, HDPE, PP, PC, Styrene |
| TP05 1611 |
65mm Tube with internal detail |
UPVC, ABS, HIPS - 4 internal lugs |
Click on a thumbnail image for a larger version:
TP01 0162
TP02 0132
TP02 2023
TP02 T269
TP05 1611
