Plastic Tubes made to order - round, square, rectangular, oval + more

Round Tubes, Split Tubes, Oval Tubes

Round Tubes, Square/Rectangular Tubes, Split Tubes, Ribbed Tubes, Oval Tubes, Hexagonal Tubes, Flexible Tubes...any Tubes to your design

TP Extrusions have an extensive library of tooling for tubing, in all shapes and variations, from an outside diameter (od) of 2mm up to 135mm with almost any inside diameter (id) possible. Tooling for tubing, particularly round tube, is relatively straightforward and cost effective to make, so even if you cannot find the exact size you need from the pages below, we may still be able to tool up for you free of charge, depending on order size.

Tubing is made and used in many different thermoplastic materials. These include rigid PVC (UPVC), flexible PVC (with different hardness levels), ABS, Polythene, HDPE, Styrene, Polypropylene, Polycarbonate and more -- please visit our Materials Processed page for more details of each of these.

Please note that very little tubing is stocked - it is mainly made to order and subject to a minimum order quantity. This enables us to cut short or long lengths (up to 4m) during extrusion, depending on your requirements. Please contact us for more details of our plastic products or processes.

round plastic tubes with variable wall thicknesses and between 2 and 25mm outside diameter

Round Tubes 2 - 25mm od

Extensive tooling details for smaller round tubing, showing the range of outside diameters and wall thicknesses that we can already make to order in many materials. Click for more details of our Small Round Plastic Tubes.

round plastic tubes made to order in different plastic materials with outside diameters between 25 and 135mm

Round Tubes 25 - 135mm od

A comprehensive range of larger round tubing tools, suitable for making to order in different thermoplastics, wall thicknesses and colours. Click for more details of our Large Round Plastic Tubes.

square and rectangular plastic tubes with rounded (radiused) or right angled corners

Square and Rectangular Tubes

Details of the available tooling for square and rectangular tube. These tubular profiles can be designed for extrusion with either square (straight) corners or radiused (rounded) corners, which are identified here along with the wall thicknesses possible and plastics suitable. Click for more details of our Square and Rectangular Plastic Tubes.

split tubes, oval tubes, ribbed tubes and other specialist plastic tubes

Special Tubes

Specialist plastic tubing, such as split tubes (for sheathing), ribbed or fluted tubes (towel rails or conveyor belt runners), conduit, hurdle rail tops, shotgun tubing, hexagonal and triangular tubing. Apart from being useful in themselves, the tooling listed illustrates the variety of tube profiles that can can be extruded. Click for more details of Specialist Plastic Tubes.

flexible plastic tubes - usually pvc - that can be run from any of the tools used for rigid tubes

Flexible Tubes

Tubes and cords in flexible plastic materials, varying from soft to semi-rigid. Many available from stock in coils of 30m. Click for more details of Flexible Plastic Tubing.