Board and Panel - H and 2 Part H Sections

TP Extrusions stock and manufacture H Sections in different shapes and sizes for use with common building and exhibition materials such as Boards, Panels, steel, plywood and foamex. Please contact us to discuss H Section requirements if you cannot find what you want.

The H Sections, Butt Joints and Division Bars on this page complement the other Board and Panel profiles that we supply. Pages detailing our T Sections, Corner Joints, Capping and Clip-on Edging can be reached from our Board and Panel Landing Page.

Stock H Sections

A range of H Section sizes and styles is stocked and available on a next working day basis. These are in popular colours and packs of different lengths. Production runs are possible from stock tools.

H Section

Unequal H

    Dimensions in mm  
Ref Dwg A B C D Materials/Comments
TP08 0063 Unequal H 3.9 3.9 12.5/30 1.7 STOCK rigid pvc, colour choice
TP08 0118 H Section 6.4 5.6 23 1.4 STOCK rigid pvc, colour choice
TP08 0132 Unequal H 12 11.5 18/25 1.2 STOCK rigid pvc, colour choice
TP08 0131 H Section 12 11.5 25 1.2 STOCK rigid pvc, colour choice
TP08 0094 Unequal H 16 14.5 22.6/31.5 1.4 STOCK rigid pvc, colour choice
TP08 0091 H Section 16 14.5 31.5 1.4 STOCK rigid pvc, colour choice
TP08 0101 H Section 19 17.5 36.5 1.4 STOCK rigid pvc, colour choice

and select from Small, Medium or Large Board and Panel pages.

.

Stock 2 Part H Sections

For board mounting that must be done face-on, or where board or panel sizes are variable, we also stock 2 Part H Section. The base section can be mounted, boards positioned and the top section then pressed into place - the barbs on the top section being held by the ridges within the base.

Please note it is possible for us to supply either section by itself, if required.

      Dimensions in mm  
  Ref Board Size A B Materials / Comments
Small Top TP08 0141 2-7mm 23 - STOCK rigid pvc, colour choice
Large Top TP08 0142 8-19mm 35 - STOCK rigid pvc, colour choice
X Large Top TP08 0143 23-26mm 46 - STOCK rigid pvc
Small Base TP08 0140 2-5mm - 35 STOCK rigid pvc, colour choice
Medium Base TP08 0142 6-12mm - 30 STOCK rigid pvc, colour choice
Large Base TP08 0146 12-16mm - 30 STOCK rigid pvc, colour choice
X Large Base TP08 0147 17-19mm - 30 STOCK rigid pvc, colour choice
XX Large Base TP08 0149 23-26mm - 35 STOCK rigid pvc

 and select from Medium or Large Board and Panel pages.

.

Custom H Sections

TP Extrusions also has a wide range of tooling for made to order H Section (both equal and unequal), Butt Joint, Jointing Strip and Division Bar, all listed below. This type of tooling is generally cost-effective to make, so if you cannot find the exact profile you require, please contact us for H Section tooling enquiries

Please note that where a tool is described as “Flexible”, the profile can only be run in this material. All other tooling is suitable for both rigid and flexible production.

Regarding the tapering of legs on each H section, commonly done so that the inserted material is gripped, the angle of taper can generally be varied when produced, so that a tool can be used for parallel or tapering legs.

H Section

Unequal H

    Dimensions in mm ** drawing below
Ref Dwg A B C D Materials/Comments
TP02 B027 H Section 0.8 0.8 6 0.7  
TP05 1855 Unequal H 1 1 6/20 1 **
TP05 2011 Unequal H 1 1 6/20 1  
TP08 W033 Unequal H 1.2 1.2 19/29 -  
TP02 B026 H Section 1.5 1.5 8 1  
TP08 0178 H Section 1.6 1.1 23.3 1.5  
TP05 1705 Unequal H 1.6 1.6 15/14 1 **
TP05 1276 H Section 2 2 12 - Thick domed top
TP05 1634 Unequal H 2 2 16/40 1.5 Clip-in legs on rear face**
TP07 1308 Unequal H 2.0 1.5 50/26 1.5 Hygienic Cladding
TP08 W264 H Section 2.3 2.3 15.8 12.60  
TP05 1789 Unequal H 2.7 0.8 50/75 1/3.4 Flexible Carpet Trim**
TP02 B028 Unequal H 3 3 15/30 1/1.5 Short side ridged**
TP08 W040 H Section 3.1 3.1 14 1.2  
TP08 W192 Unequal H 3.2 3.2 13/24 1.2  
TP08 W262 Unequal H 3.3 3.3 16.7 -  
TP02 B025 H Section 3.5 3.5 14 1  
TP08 W035 H Section 3.6 3.6 12.5 1  
TP05 1374 Unequal H 3.6 3.6 51/68 1.5/5 Flexible Carpet Trim
TP08 W214 Unequal H 3.8 3.8 25/51 1.3  
TP05 1272 Unequal H 3.8 3.8 51/78 1.8 Carpet Trim
TP07 1331 Unequal H 3.8 3.4 55/25 2 Hygienic Cladding
TP08 W226 H Section 4 2.8 21 1  
TP08 W023 H Section 4 4 21 1  
TP08 W238 H Section 4.2 4.2 22 1  
TP05 1119 H Section 4.5 3.5 18 1 Front face angled**
TP08 W160 Unequal H 4.5 4.5 8.8/13 1.7 Stem on short face mimics T Section **
TP08 W042 H Section 4.6 4.6 15 -  
TP05 1374A Unequal H 5 2.5 50/62 1/3.4 Flexible Carpet Trim
TP08 2149 Unequal H 5 5 10/30 1.2  
TP02 B024 Unequal H 5 5 20/35 1.5 **
TP05 1912 H Section 5.8 5.8 29 1.5 Runner in both channels**
TP02 B023 Unequal H 5.8 5.8 21/37 1.8  
TP02 B022 Unequal H 6.8 6.8 22/40 1  
TP05 1332 Unequal H 7 7 22/48 2 **
TP02 B021 H Section 8 8 20 2  
TP05 2002 H Section 8 8 21 -  
TP08 W034 H Section 8.1 8.1 21 1  
TP08 W188 H Section 8.4 7 21 1  
TP02 B020 Unequal H 9 6 30/54 2 Short side legs straight, long side angled**
TP08 W263 H Section 9 7.5 22 1.2  
TP08 2016 H Section 9 8 22 1  
TP08 W305 H Section 10.5 9.5 22.5 1.3  
TP05 1053 Unequal H 14.5 14 35.5/41 - Gentle curve front face
TP05 1803 H Section 19.5 18.5 21 1.5 **
TP03 H001 H Section 19.8 19.8 36   UPVC
TP08 W313 H Section 20 20 39 1.4  
TP08 W210 H Section 21.4 1.5 32 1 Flexible
TP08 W008 H Section 26 26 23 1.7  
TP07 2145 H Section 26 26 68 4 PP
TP07 1374 H Section 35 33 68 2  
TP05 2113 H Section 67 64 42 2  

Click on a thumbnail image for a larger version:

  • butt joint with clip legs
    TP05 1634
  • unequal H section with angled legs
    TP02 B020
  • 5.8mm H section with internal runners
    TP05 1912
  • 1mm butt joint
    TP05 1855
  • 19.5mm H section with tapering legs
    TP05 1803
  • 1.6mm H section
    TP05 1705
  • 7mm unequal H section
    TP05 1332
  • unequal H section with parallel legs
    TP02 B024
  • 3mm butt joint with ridged front face
    TP02 B028
  • unequal H section with barbed fixing stem
    TP08 W160
  • 4.5mm H section with ridged front face
    TP05 1119
  • flexible carpet gripper section
    TP05 1789
  • 4.5mm H section with ridged front face
    TP07 1331
  • flexible carpet gripper section
    TP07 1308
 
© TP Extrusions Ltd :: Plastic and PVC Extrusion Company. Co Reg: #5443200 (England). Privacy / Site Map / Contact
Unit 1D Meadway Court, Rutherford Close, Meadway Technology Park, Stevenage, SG1 2EF. Registered Office: 2nd Floor, 2 Walsworth Road, Hitchin, SG4 9SP

home : About Us : Products : Angles : Tubes : Multi-Cavity Planking : Flat Strips : Furniture Profiles : Poster Hangers : Channels : Label Holders : Ticket Strips : Profiles : Board and Panel Profiles : Slatwall Inserts : Process : Materials Processed : Custom Extrusion : Beginners Guide