Board and Panel - T Sections

TP Extrusions stock and produce to order a wide range of T Strip in varied sizes and designs, for joint filling, use as bumper strip and general edge protection. T Barb profile is usually knocked into a groove and is popular in different flexible and rigid materials, and T profile with a straight stem can be used to cover Board and Panel joints. Please contact us to discuss T Section requirements if you cannot find what you want.

The Tee Profiles on this page complement the other Board and Panel profiles that we supply. Pages detailing our H Sections, Corner Joints, Capping and Clip-on Edging can be reached from our Board and Panel Landing Page.

.

Stock T Sections

Tee Section is stocked in flexible and rigid PVC, in a variety of colours. It is possible to use stock tooling for production runs.

T Barbed

T Equal

    Dimensions in mm  
Ref DWG A B C D Materials / Comments
TP08 2102 T Barbed 12.5 5.4 2.1 - STOCK flex pvc, colour choice
TP08 2101 T Barbed 16 6.5 2.8 - STOCK flex pvc, colour choice
TP08 2100 T Barbed 19 11 3.3 - STOCK flex pvc, colour choice
TP08 0066 T Barbed 19 12 3.7 - STOCK rigid pvc, colour choice
TP08 0098 T Equal 19 18.4 1.6 - STOCK rigid pvc, colour choice
TP08 0160 T Equal 25 14 1.6 - STOCK rigid pvc, colour choice
TP08 0186 T Equal 38 17 2 - STOCK rigid pvc, colour choice
TP08 0187 T Equal 50 9 3.1 - STOCK rigid pvc, colour choice


For details of pack sizes and prices on stock rigid Tee Section please visit our sister site Stock Plastic Profiles Large Board and Panel page. For details of our stock flexible Tee Section please visit the Stock Plastic Profiles Flexible Edgings page.

.

Custom T Sections

The tooling detailed here is for made to order Tee Sections and bumper profiles. If the size or design you are looking for is not listed, tooling will generally be simple and cost effective to make, so please contact us to discuss any T Section tooling enquiries.

Please note that where a tool is described as “Flexible”, the profile can only be run in this material. All other tooling is suitable for both rigid and flexible production.

Generic T Section Dimensions

  Dimensions in mm  
Ref A B C D Materials / Comments(** drawing below)
TP02 0114 3.5 4 1.5 1.5 Straight stem **
TP01 0113 3.6 1.5 1.7 1.9 Flat top, bumps on stem
TP08 W205 4.25 20 2.9 - Straight stem
TP05 0973 5 16 1 1 Flexible, flat top, straight stem
TP08 W094 6.4 14.3 1.1 4.7 Raised cap**
TP05 1123 8.9 4.6 3.8 2.3 Domed top, straight bullnosed stem
TP08 W127 9 2 2.5 - Straight stem
TP05 1692B 9 6.1 2.8 1.5 Flat top, barbed stem
TP05 1792 9.5 5.6 3.2 4.5 Domed raised top, barbed stem**
TP02 B002 10 3.5 1.5 1 Domed top, barbed stem
TP02 0017 10 5 4.7 2 Bumper profile, straight stem
TP06 0116 10 6 3.2 2 Flexible PVC, barbed, metallic foil finish**
TP05 1692 10 6.1 3.4 1.5 Flat top, barbed stem
TP08 W084 10.5 13 1 2.5 Offset stem
TP05 1191 11.5 5.3 1.1 1.1 Flat top, straight stem
TP05 1698 12 6.12 3.4 1.5 Flat top, barbed stem
TP05 1675 12.5 6.1 3.5 1.5 Flat top, barbed stem
TP02 B003 13 6.5 2.5 1.2 Flat top, barbed stem
TP05 1670 14 6.1 3.5 1.5 Flexible, 5mm lip on one side, barbed stem**
TP02 B004 14.5 6 2.5 2 Domed top, barbed stem
TP05 1056A 15 5 2.5 1.7 Flexible, domed top, barbed stem
TP01 2022 15 6 5.7 - Domed raised top, tapering stem
TP05 1284 15 7 3.2 3 Flat top, barbed stem
TP05 1162A 15 7 3.5 1.5 Flexible, domed top, barbed stem
TP05 1791 15 8 3.5 21.5 Domed raised top, barbed stem**
TP08 W026 16 - 3.7 - Barbed stem
TP02 B006 16 6.5 3 2.3 Domed top, barbed stem
TP02 B005 16 7 3 1.5 Flat ridged top, barbed stem
TP05 1056 18 6 3 2 Flexible, domed top, barbed stem
TP02 2056 18 7 3.8 2.8 Domed top, barbed stem
TP08 W130 18 19 - - Barbed stem
TP05 1448 18.5 11.5 4.5 9.25 Flexible, thick domed top, barbed stem**
TP05 1162 19 7 3.5 1.5 Flexible, domed top, barbed stem
TP02 B007 19 7.5 3 3 Domed top, barbed stem**
TP08 W069 19 8 3.8 -  
TP08 W073 19 8.5 3.5 - Barbed stem
TP05 1680 19.8 12.5 4 2.5 Flat top, barbed stem**
TP01 0146 20 6 2 3 Flexible, domed top, offset stem with hook
TP08 W122 20 8 3.5 - Barbed stem
TP05 1713 20 63.5 1.5 1.5 Flat top, straight stem**
TP02 B008 21 7.5 3.5 2 Flat top, barbed stem
TP05 1057 22 - - - Flexible, domed top, barbed stem
TP02 B009 22 9 4.5 3.5 Domed top, barbed stem
TP02 B010 23 9 4.5 3.7 Domed top, barbed stem
TP02 B013 24 - 3.5 - Cap hooks over 18.5mm board, barbed stem
TP05 1779 25.5 5.62 3.2 4.5 Flat raised top, barbed off centre stem**
TP08 W024 25.8 7.9 3.2 2.3 Offset barbed stem wth overhang one side**
TP05 1453 26 7 3.3 2.75 Flat lipped top, barbed off centre stem
TP05 1452 26 10 3.3 3 Flat top, barbed stem
TP05 1639 27.5 12 4.2 3 Flat top, barbed stem
TP02 2188 28 8.9 2.8 2.8 Domed top, barbed stem
TP05 1793 29.2 15.2 2.5 2.5 Flat top, straight off centre stem
TP02 B011 30 9.5 3 3 Domed top, barbed stem
TP02 B012 33 10 3.2 3.5 Domed top, barbed stem
TP08 W321 35 33.5 1.5 - Barbed stem
TP08 W067 38 17 6.2 - Barbed stem
TP02 B001 40 14 2 2 Flat top, straight stem
TP08 2154 45 10 1.3 - Offset straight stem
TP08 2031 50 12.7 1.4 - Barbed stem

Click on a thumbnail image for a larger version:

  • straight stem tee section
    TP02 0114
  • raised cap straight stem T section
    TP08 W094
  • domed top barbed stem T sectionTP05 1792
  • metallic foil finished barbed T section
    TP06 0116
  • T section with lip on one side
    TP05 1670
  • domed top tee section with barbed stem
    TP05 1791
  • thick domed flexible T section
    TP05 1448
  • domed top barbed stem tee section
    TP02 B007
  • flat top barbed stem T section
    TP05 1680
  • flat top long straight stem T section
    TP05 1713
  • flat raised top offset stem T sectionTP05 1779
  • offset barbed stem T section
    TP08 W024
 
© TP Extrusions Ltd :: Plastic and PVC Extrusion Company. Co Reg: #5443200 (England). Privacy / Site Map / Contact
Unit 1D Meadway Court, Rutherford Close, Meadway Technology Park, Stevenage, SG1 2EF. Registered Office: 2nd Floor, 2 Walsworth Road, Hitchin, SG4 9SP

home : About Us : Products : Angles : Tubes : Multi-Cavity Planking : Flat Strips : Furniture Profiles : Poster Hangers : Channels : Label Holders : Ticket Strips : Profiles : Board and Panel Profiles : Slatwall Inserts : Process : Materials Processed : Custom Extrusion : Beginners Guide