Full List of Plastic Channels in Size Order

TP Extrusions has an extensive range of Channel tooling, in all its variations. The table below lists all of the standard channel profiles in width order, as some functions can be satisfied with channels of different leg length or design.

Please bear in mind that the description of each entry is purely given to show which drawing the dimensions refer to. There are several profiles that would be, for example, suitable as Clip On Edging, Capping or a lightweight Single Channel, depending on how the legs were angled in production - for simplicity these are listed as C Sections, as the C Section drawing accurately reflects the dimensions.

Only standard Channels are listed - for Channels with lips, flanges or spurs please refer to our Channel Variants page which details dimensions and includes relevant drawings.

If you cannot find what you want, please contact us to discuss Channel requirements

In the table below, where no “B” dimension shown for C Section, the channel is designed to run with parallel legs - most however can have legs angled inwards to grip, per stock C Sections

U Clip

J Section

C Section

Single Track

Clip On

    Dimensions in mm  
Ref Dwg A B C D Comments(**dwg below)
TP08 W018 J Section 0.75 5 8 1  
TP08 W057 U Clip 0.8 8 - 2  
TP05 1856 J Section 1 4 20 1  
TP02 C013 U Clip 1.1 9/11 3 0.95 Gap can taper to 0mm**
TP02 C012 U Clip 1.4 4 3 0.8 Gap can taper to 0mm
TP02 C009 U Clip 1.4 7.5 3.4 1 Legs meet in midde not ends**
TP02 C011 U Clip 1.6 7.5 3.6 1 Gap can taper to 0.9mm**
TP02 C010 U Clip 1.6 7 4.2 1.2 Gap can taper to 0mm
TP08 W224 J Section 1.6 7.5 20 1.5  
TP08 W261 U Clip 1.6 8 - -  
TP08 W102 J Secion 2 5 10 1.5  
TP02 C014 U Clip 2 8 4 1 Gap can taper to 0mm
TP05 1313 J Section 2 9 15.75 2  
TP05 1250 J Section 2 10 20 1.5 Radiused corners
TP02 C001 U Clip 2 14 6.6 2.5 Gap can taper to 0mm
TP08 W175 J Section 2 - 19 1.2  
TP08 W090* U Clip 2 32 - 1.5  
TP08 W158 J Section 2.3 9.2 16 1.2  
TP08 W213 J Section 2.4 11 19 1.5  
TP02 2180 C Section 2.5 1 25 1 HDPE
TP08 W095 J Section 2.5 4.5 10 1.5  
TP02 C002 U Clip 2.5 9.3 5.7 1.7 Gap can taper to 0mm
TP02 C003 U Clip 2.5 18/22 7.3 2.4 Gap can taper to 0mm
TP08 W176 J Section 2.5 4.5 20 1.5  
TP08 W206 J Section 2.7 4 10 1.5  
TP05 1856 J Section 3 4 20 1  
TP08 W216 J Section 3 6 15 1.3  
TP08 W268 C Section 3 - 10 1.6  
TP05 1457 J Section 3 13 30 1  
TP02 C015 U Clip 3 10 5.4 1.2 Gap can taper to 0.9mm
TP02 C016 U Clip 3 14 6 1.5 Gap can taper to 0mm
TP08 W169 J Section 3.3 18.8 28 1.2  
TP02 C004 U Clip 3.5 10.5 6.4 2 Gap can taper to 1mm**
TP08 W235* J Section 3.5 13 25 1.5  
TP08 0062 J section 3.6 7.5 19 1.7 STOCK
TP05 1194 J Section 4 8 25 2  
TP08 W054 J Section 4 9 21 2  
TP08 W230 J Section 4 10.5 15.5 1  
TP02 C017 C Section 4.5 - 7.5 1.5  
TP08 0042 Single Track 4.6 - 7 1.4 STOCK
TP08 0041 Single Track 4.6 9 - 1.4 STOCK
TP08 W248* C Section 4.8 - 6.8 1.4  
TP05 1737 C Section 5 - 2 1 Very Shallow**
TP02 C018 Single Track 5 - 2.6 1  
TP02 C019 Single Track 5 6 - 1  
TP08 W225 J Section 5 7 20 1.2  
TP08 2148 J Section 5 8 20 1.2  
TP08 W014 C Section 5.2 4.8 5 -  
TP08 W098 J Section 5.5 8.1 23 1  
TP05 1333 C Section 5.9 5.6 12 1.5 Legs have half rounded ends**
TP02 C005 U Clip 6 11.8 9 3.4 Gap can taper to 4mm
TP05 1636 J Section 6 8 9 0.85 Short leg angled in**
TP05 1991 J Section 6 15 42 1.5  
TP02 C021 C Section 6 - 8.4 1  
TP02 C020 C Section 6 - 9.5 1.3  
TP08 W212 C Section 6.2 5.2 5 0.75  
TP02 C022 C Section 6.2 - 5.5 1  
TP08 W015 C Section 6.2 - 6.4 1.5  
TP08 0120 J Section 6.2 13.5 20.5 1.4 STOCK
TP08 0119 C Section 6.4 5.5 12.8 1.4 STOCK
TP08 0039 Single Track 6.5 9.6 - 1.6 STOCK
TP08 0040 Single Track 6.5 - 7.4 1.6 STOCK
TP02 C006 U Clip 6.5 13 10 3.6 Gap can taper to 5mm
TP05 0978 C Section 7 5 13 1  
TP08 W219 C Section 7 5.2 7.5 1  
TP02 C023 C Section 7 - 14 0.8  
TP05 1331 J Section 7 12 25 2 Short leg tapered at tip
TP02 C024 C Section 7.5 - 12.6 1.6  
TP02 C007 U Clip 7.5 16.4 13 5 Gap can taper to 6mm**
TP02 C025 C Section 8 - 16 1  
TP08 W077 C Section 8.5 - 12 -  
TP02 C026 C Section 9 - 12.5 1  
TP02 C056 J Section 9 16 28 2  
TP02 C027 C Section 9.5 - 11 0.7 Radiused corners
TP08 W269 C Section 9.5 - 13.5 1.5  
TP08 2105 J Section 9.8 18 19.5 1.8 Tapered edge on short leg
TP08 0095 J Section 10 8 22 1.1 STOCK
TP08 W038 C Section 10 9 10 1  
TP08 W003 C Section 10 - 12.5 1  
TP08 W231 C Section 10.2 9 10.7 1.2  
TP05 1383 C Section 10.5 - 10 1  
TP05 1767 J Section 10.6 24 27 2 Short leg angled to touch other leg, raduised corners**
TP02 C028 C Section 11 - 7.4 0.8  
TP08 0133 J Section 12 10 20 1.2 STOCK
TP08 0130 C Section 12 11.5 14 1.2 STOCK
TP08 W326 C Section 12 - 9.2 2.4  
TP08 0097 Clip On 12.5 11.9 6 1.2 STOCK
TP08 0034 Single Track 12.5 - 10 2 STOCK
TP08 0033 Single Track 12.5 18 - 2 STOCK
TP08 W144 C Section 12.5 12 10 1.8  
TP08 W078 C Section 14 13 13 1.2  
TP08 W211 C Section 14.25 8.5 18.75 1.25  
TP05 1720 J Section 15 8 57.5 3  
TP02 C030 C Section 15.3 - 15 1  
TP02 C031 C Section 15.5 - 19 2  
TP08 W236 C Section 15.5 - 19 2  
TP08 W249 C Section 16 - 5.3 1.35  
TP08 0003 Clip On 16 14.5 7.6 1.7 STOCK
TP08 0111 Clip On 16 14.5 9.6 3.1 STOCK
TP08 0090 C Section 16 14.5 16.1 1.4 STOCK
TP08 0121 C Section 16 14.5 20.6 1.7 STOCK
TP08 W243 C Section 16 14.8 20.5 1.8  
TP02 C032 C Section 16.2 - 8 1.4  
TP08 2041 J Section 16.8 25.7 29.4 1.45  
TP08 W106 C Section 17.5 16 - -  
TP08 0036 Single Track 17.6 - 11 2.2 STOCK
TP08 0035 Single Track 17.6 19 - 2.2 STOCK
TP02 C033 C Section 18 - 13.4 1.5  
TP05 1804 C Section 18.2 16.5 9.5 1.5 **
TP05 1062 C Section 18.5 - 25.4 3  
TP08 W294 C Section 18.5 - 24.7 4 Both walls taper at opening
TP02 C035 C Section 19 - 5 1  
TP02 C034 C Section 19 - 9 1.5 Radiused corners
TP08 0073 C Section 19 - 25 1.8  
TP08 0001 Clip On 19 17.5 7.2 1.7 STOCK
TP08 0113 Clip On 19 17.5 10 3.4 STOCK
TP08 0100 C Section 19 17.5 21.5 1.4 STOCK
TP08 0122 C Section 19 17.5 20.5 1.7 STOCK
TP08 W302 Clip On 19.5 17.5 24.5 2.2  
TP02 C036 C Section 20 - 17.5 1.2  
TP08 W317 C Section 20 - 22 1.7  
TP08 2051 C Section 20 - 41 4  
TP08 2168 C Section 21 18 22 1.9  
TP02 C037 C Section 22 - 6.3 1  
TP08 W255 Clip On 22 20 11 1.9  
TP08 2044 J Section 22 25.5 29.5 1.45  
TP02 C038 C Section 23 - 19 1.5  
TP08 W207 C Section 25 - 8.1 -  
TP08 2144 C Section 25 - 28 2.2  
TP02 C039 C Section 25.4 - 22 1.6  
TP08 W198 C Section 25.5 - 29.5 2.5  
TP08 W177 C Section 26 23.5 20 1.4  
TP08 0166 Clip On 26 24 17 1.7  
TP08 W126 J Section 26 20 27 1.8  
TP05 1439 Clip On 26.5 17.3 7 1 Convex back**
TP02 C040 C Section 27 - 13 1 Radiused corners
TP02 C041 C Section 28 - 26 2  
TP08 0165 Clip On 28 26 17 1.7  
TP08 W260 C Section 29 - 12 1.5  
TP02 C042 C Section 31 - 13 2 Radiused corners
TP08 0191 C Section 31 29 19 1.5  
TP02 C043 C Section 33 - 29 2  
TP08 2045 J Section 33 25.5 29.5 1.45  
TP08 W245 Clip On 34 - 5 1 Notch in centre inside channel
TP08 W208 C Section 35 - 9.25 1.25  
TP02 C044 C Section 35 - 22 2.5  
TP08 W242 C Section 36 - 31 4  
TP02 C045 C Section 37 - 20.5 2 Radiused corners
TP08 2141 Clip On 39 28 10 0.9  
TP02 C046 C Section 39.5 - 12.5 2 Radiused corners**
TP02 C047 C Section 42 - 16.5 1 Radiused corners
TP07 0038 Clip On 42.5 39.7 15 3 Radiused corners
TP08 W043* C Section 43 - 13.5 2  
TP02 C055 J Section 47 15 59 1.6 Radiused corners
TP08 2106 C Section 50 - 20 2.5  
TP02 C048 C Section 54 - 17 1  
TP08 W133 Clip On 55.5 53.5 6 1 Nibs at opening
TP02 C049 C Section 61 - 28 2  
TP08 0134 C Section 64 - 10 3  
TP08 2046 J Section 87 31.5 41.5 1.5  

For more specific information on table tooling entries click on the following:
- Capping (C and J Section) see our Capping Channels page
- Single Tracks see our Single Sliding Tracks page
- Clip On Channels see our Clip On Channels page

Click on a thumbnail image for a larger version:

  • U Clip with unequal length legs
    TP02 C013
  • U Clip with spring legs
    TP02 C009
  • standard horseshoe U clip profile
    TP02 C011
  • U clip with straight internal walls
    TP02 C004
  • heavy duty U clip
    TP02 C007
  • shallow channel with radiused corners
    TP02 C046
  • very shallow channel
    TP05 1737
  • channel with rounded legs
    TP05 1333
  • J section with angled short leg
    TP05 1636
  • clip on channel with angled legs
    TP05 1804
  • clip on profile with convex back
    TP05 1439
 
© TP Extrusions Ltd :: Plastic and PVC Extrusion Company. Co Reg: #5443200 (England). Privacy / Site Map / Contact
Unit 1D Meadway Court, Rutherford Close, Meadway Technology Park, Stevenage, SG1 2EF. Registered Office: 2nd Floor, 2 Walsworth Road, Hitchin, SG4 9SP

home : About Us : Products : Angles : Tubes : Multi-Cavity Planking : Flat Strips : Furniture Profiles : Poster Hangers : Channels : Label Holders : Ticket Strips : Profiles : Board and Panel Profiles : Slatwall Inserts : Process : Materials Processed : Custom Extrusion : Beginners Guide