Plastic Capping Channels (C, U, J Sections)

TP Extrusions stock and manufacture a range of Capping profiles for use on furniture, boards and panels. The two main types are: C Sections, where the legs are typically of equal length and can be tapered in to grip; and J Sections, where one leg is longer than the other.

Please note that the channels in the tables below can be used for other purposes if required, and that many of our general channels listed on our Full Channel List page would also be suitable as board capping and edging profiles.

Contact us to discuss Capping requirements if you cannot find what you want.

.

Stock Capping Channels

C and J Sections stocked in popular sizes and a range of colours. These also include some Heavy Duty capping profiles for more robust protection of board edges.

C Section Capping

    Dimensions in mm  
Ref Size A B C D Materials / Comments
TP08 0119 6mm 6.4 5.5 12.8 1.4 STOCK rigid pvc, colour choice
TP08 0130 12mm 12 11.5 14 1.2 STOCK rigid pvc, colour choice
TP08 0090 16mm 16 14.5 16.1 1.4 STOCK rigid pvc, colour choice
TP08 0121 Heavy Duty 16 14.5 20.6 1.7 STOCK rigid pvc, colour choice
TP08 0100 19mm 19 17.5 21.5 1.4 STOCK rigid pvc, colour choice
TP08 0122 Heavy Duty 19 17.5 20.5 1.7 STOCK rigid pvc, colour choice

J Section Capping

    Dimensions in mm  
Ref Size A B C D Materials / Comments
TP08 0062 3mm 3.6 7.5 19 1.7 STOCK rigid pvc, colour choice
TP08 0135 5mm 5 8 20 1.2 STOCK rigid pvc
TP08 0120 6mm 6.2 13.5 20.5 1.4 STOCK rigid pvc, colour choice
TP08 0095 10mm 10 14 22 1.1 STOCK rigid pvc, colour choice
TP08 0133 12mm 12 10 20 1.2 STOCK rigid pvc, colour choice

.

Custom Capping Channels

The tooling listed below is for made to order channels, and can generally have the angle of the legs altered during production to give greater grip for the Capping. Channels with lips, nibs or flanges are not listed here - these are on our Channel Variants page.

The J Section tooling is listed in a separate table below the C Section.

Please note that tooling for channels is often simple and cost effective to make, so please contact us to discuss your Capping requirements.

Custom C Section

Where no “B” dimension shown, channel designed to run with parallel legs - most however can have legs angled inwards to grip, per stock C Sections.

  Dimensions in mm  
Ref A B C D Comments (** dwg at bottom of page)
TP02 2180 2.5 1 25 1 HDPE
TP08 W268 3 - 10 1.6  
TP02 C017 4.5 - 7.5 1.5  
TP08 W248* 4.8 - 6.8 1.4  
TP08 W014 5.2 4.8 5 -  
TP05 1333 5.9 5.6 12 1.5 Legs have half rounded ends**
TP02 C021 6 - 8.4 1  
TP02 C020 6 - 9.5 1.3  
TP08 W212 6.2 5.2 5 0.75  
TP02 C022 6.2 - 5.5 1  
TP08 W015 6.2 - 6.4 1.5  
TP05 0978 7 5 13 1  
TP08 W219 7 5.2 7.5 1  
TP02 C023 7 - 14 0.8  
TP02 C024 7.5 - 12.6 1.6  
TP02 C025 8 - 16 1  
TP08 W077 8.5 - 12 -  
TP02 C026 9 - 12.5 1  
TP02 C027 9.5 - 11 0.7 Radiused corners
TP08 W269 9.5 - 13.5 1.5  
TP08 W038 10 9 10 1  
TP08 W003 10 - 12.5 1  
TP08 W231 10.2 9 10.7 1.2  
TP05 1383 10.5 - 10 1  
TP02 C028 11 - 7.4 0.8  
TP08 W326 12 - 9.2 2.4  
TP08 W144 12.5 12 10 1.8  
TP08 W078 14 13 13 1.2  
TP08 W211 14.25 8.5 18.75 1.25  
TP02 C030 15.3 - 15 1  
TP02 C031 15.5 - 19 2  
TP08 W236 15.5 - 19 2  
TP08 W249 16 - 5.3 1.35  
TP08 W243 16 14.8 20.5 1.8  
TP02 C032 16.2 - 8 1.4  
TP08 W106 17.5 16 10.5 1.7  
TP02 C033 18 - 13.4 1.5  
TP05 1804 18.2 16.5 9.5 1.5 **
TP05 1062 18.5 - 25.4 3  
TP08 W294 18.5 - 24.7 4 Both walls taper at opening
TP02 C035 19 - 5 1  
TP02 C034 19 - 9 1.5 Radiused corners
TP08 0073 19 - 25 1.8  
TP02 C036 20 - 17.5 1.2  
TP08 W317 20 - 22 1.7  
TP08 2051 20 - 41 4  
TP08 2168 21 18 22 1.9  
TP02 C037 22 - 6.3 1  
TP02 C038 23 - 19 1.5  
TP08 W207 25 - 8.1 -  
TP08 2144 25 - 28 2.2  
TP02 C039 25.4 - 22 1.6  
TP08 W198 25.5 - 29.5 2.5  
TP08 0166 26 24 17 1.7  
TP08 W177 26 23.5 20 1.4  
TP02 C040 27 - 13 2 Radiused corners
TP08 0165 28 26 17 1.7  
TP02 C041 28 - 26 2  
TP08 W260 29 - 12 1.5  
TP02 C042 31 - 13 2 Radiused corners
TP08 0191 31 29 19 1.5  
TP02 C043 33 - 29 2  
TP08 W208 35 - 9.25 1.25  
TP08 W242 36 - 31 4  
TP07 1372 36 32 36 2  
TP02 C045 37 - 20.5 2 Radiused corners
TP02 C046 39.5 - 12.5 2 Radiused corners
TP02 C047 42 - 16.5 1 Radiused corners
TP08 W043* 43 - 13.5 2  
TP08 2106 50 - 24 2.5  
TP02 C048 54 - 17 1  
TP02 C049 61 - 28 2  
TP08 0134 64 - 10 3  
TP05 2111 67 64 20 2  

Custom J Section

  Dimensions in mm  
Ref A B C D Comments (** dwg below)
TP08 W018 0.75 5 8 1  
TP05 1856 1 4 20 1  
TP08 W224 1.6 7.5 20 1.5  
TP08 W102 2 5 10 1.5  
TP05 1313 2 9 15.75 2  
TP05 1250 2 10 20 1.5 Radiused corners
TP08 W175 2 - 19 1.2  
TP08 W158 2.3 9.2 16 1.2  
TP08 W213 2.4 11 19 1.5  
TP08 W095 2.5 4.5 10 1.5  
TP08 W176 2.5 4.5 20 1.5  
TP08 W206 2.7 4 10 1.5  
TP08 W216 3 6 15 1.3  
TP05 1457 3 13 30 1  
TP08 W169 3.3 18.8 28 1.2  
TP07 1332 3.4 15 30 2  
TP07 1316 3.4 21 28.3 1.5  
TP08 W235* 3.5 13 25 1.5  
TP05 1194 4 8 25 2  
TP08 W054 4 9 21 2  
TP08 W230 4 10.5 15.5 1  
TP08 W225 5 7 20 1.2  
TP08 2148 5 8 20 1.2  
TP08 W098 5.5 8.1 23 1  
TP05 1636 6 8 9 0.85 Short leg angled in**
TP05 1991 6 15 42 1.5  
TP05 1331 7 12 25 2 Short leg tapered at tip
TP02 C056 9 16 28 2  
TP08 2105 9.8 18 19.5 1.8 Tapered edge on short leg
TP05 1767 10.6 24 27 2 Short leg angled in to touch other leg. radiused corners**
TP05 1720 15 8 57.5 3  
TP08 2041 16.8 25.7 29.4 1.45  
TP08 2044 22 25.5 29.5 1.45  
TP08 W126 26 20 27 1.8  
TP08 2045 33 25.5 29.5 1.45  
TP02 C055 47 15 59 1.6 Radiused corners
TP08 2046 87 31.5 41.5 1.5  

Click on a thumbnail image for a larger version:

  • J section with acutely anged short leg
    TP05 1767
  • J section with angled short leg
    TP05 1636
  • clip on channel with angled legs
    TP05 1804
  • channel with rounded legs
    TP05 1333
  • channel with rounded legs
    TP07 1332
  • channel with rounded legs
    TP07 1316
 
© TP Extrusions Ltd :: Plastic and PVC Extrusion Company. Co Reg: #5443200 (England). Privacy / Site Map / Contact
Unit 1D Meadway Court, Rutherford Close, Meadway Technology Park, Stevenage, SG1 2EF. Registered Office: 2nd Floor, 2 Walsworth Road, Hitchin, SG4 9SP

home : About Us : Products : Angles : Tubes : Multi-Cavity Planking : Flat Strips : Furniture Profiles : Poster Hangers : Channels : Label Holders : Ticket Strips : Profiles : Board and Panel Profiles : Slatwall Inserts : Process : Materials Processed : Custom Extrusion : Beginners Guide