Variant Plastic Channels

The tooling listed is for any profile which is predominantly a Channel, but there are additional features, e.g. nibs, flanges or barbs. Every effort has been made to describe the main features accurately, but please check the drawings at the bottom of the page or contact us to discuss bespoke Channel requirements so we can provide a drawing.

Alternatively, if a straightforward plastic Channel profile would be suitable then click here for our comprehensive list of conventional Channels.


Stock Variant Channels

Tank Top is a channel designed to fit over glass walls in aquaria and vivaria, with a flange to support a lid.

Tank Top

    Dimensions in mm  
Ref Size A B C D Materials / Comments
TP08 0115 6mm 6.1 14.6 6.2 1.2 STOCK black rigid pvc
TP08 0116 10mm 10 15.9 10 1.2 STOCK black rigid pvc

Custom Variant Channels

Channels are listed in width order.

Ref Description Base Shape Comments (** dwg below)
TP08 W037 1 x 10 x 2.5 Capping One side spurs down 22.5mm total
TP05 1561 1.25mm gap Menu Holder   17mm base, 12mm legs **
TP08 W172 2.4 x 19 x 1.2 J Section Small flange at base of long side
TP08 W174 2.6 x 5.5 x 19.5 x 1.4 J Section Tiny flange at base of long side
TP02 C008 2.7mm Asymmetrical Clip   **
TP08 W080 3 x 8/30 x 1.2 J Section Small flange at base
TP08 W217 3 x 14 x 1.4 Channel Tank Top - wide flange at top
TP08 W327 3.3 x 8.5 Channel Wide notched flange from base
TP08 W215 3.8 x 20 x 28 x 1.3 J Section 12.8mm flange from long side
TP08 W025 4.5 x 7.5 x 1 Channel Side barbs and lips at opening
TP08 W089 5 x 2.5 x 8.8 C Section Tapering channel with 3 prongs on base
TP05 1475 5 x 6/13.5 x 1.5 J Section 15mm flange from long side
TP05 1322 6 x 6 x 1 C Section Legs taper in, internal nibs at opening **
TP08 W154 6.5 x 10 x 1 Channel 45mm Spur down from base
TP08 W017 7 x 7.5 x 1.5 Channel Side flange
TP08 W155 7 x 16.8 x 1.8 Channel Outer nibs in middle of legs
TP08 W030 7 x 14.5 x 1.4 Channel Tank Top - 7.5mm flange at top
TP05 1623 7.3 x 6.5/13.5 x 1.5 J Section 39.5mm flange from long side
TP08 W121 8 x 8 x 2 Channel Nibs at opening - gap 6.8mm
TP08 2143 8.5 x 16 x 2.5 Channel 8.5mm flange at base
TP08 W190 9 x 18.6 x 1.5 Channel Internal hooks at opening, double flange at base
TP05 1574 10 x 7 x 1.75 Channel Bulges on outside of legs **
TP08 W180 11.6 x 18 x 1.2 Channel Nibs at opening - gap 8.1mm
TP08 W032 12.5 x 10.2mm Channel Internal nibs at opening
TP08 2110 12.5 x 9.5 x 1.2 Channel 13mm offset spine from base
TP02 C059 12.7 x 12.7 x 1.2 Channel One side continues down as flange **
TP02 C029 13.5 x 8.8 x 0.8 C Section Internal nibs at opening **
TP08 W203 16 x 21.5 x 2 C Section 12.8mm flange at base
TP02 C057 16 x 43 x 2 C Section Internal nibs at opening **
TP05 1802 18 x 12.5 x 1.5 Channel Legs taper in, internal nibs at opening **
TP08 W058 18.5 x 20 x 1.4 C Section Legs taper outwards to 25mm gap
TP08 W006 20.5 x 16 x 1 Channel Internal nibs near bottom of channel
TP02 C060 22.5 x 19 x 1.5 Channel Tank Top - 23mm flange at top **
TP02 C061 22.5 x 19 x 1.5 Channel 24mm flange both sides **
TP08 W125 25 x 24.5 C Section Internal runner within channel
TP05 1451 26 x 18.75 x 2.5 Channel 13.5mm flange both sides
TP05 1943 31.6 x 14.5 x 2.5 Channel Short lips at opening, radiused corners **
TP05 2015 41 x 46.5 x 1 Channel Domed channel **
TP05 1903 51.5 x 28 x 1 Channel 6mm lips at opening, radiused corners **
TP05 1797 102 x 22 x 1 Channel 7mm lips at opening **

Click on a thumbnail image for a larger version:

  • menu holder profile
    TP05 1561
  • asymmetrical clip profile
    TP02 C008
  • channel with internal nibs at opening
    TP05 1322
  • tank top with double flange
    TP02 C061
  • deep channel with lips at opening
    TP05 1903
  • channel with outside bumps on legs
    TP05 1574
  • finger pull drawer profile
    TP02 C059
  • channel with shallow lips at opening
    TP05 1943
  • very wide channel with lips at opening
    TP05 1797
  • deep channel with nibs at opening
    TP02 C057
  • channel with acutely angled legs
    TP05 1802
  • large domed channel
    TP05 2015
 
© TP Extrusions Ltd :: Plastic and PVC Extrusion Company. Co Reg: #5443200 (England). Privacy / Site Map / Contact
Unit 1D Meadway Court, Rutherford Close, Meadway Technology Park, Stevenage, SG1 2EF. Registered Office: 2nd Floor, 2 Walsworth Road, Hitchin, SG4 9SP

home : About Us : Products : Angles : Tubes : Multi-Cavity Planking : Flat Strips : Furniture Profiles : Poster Hangers : Channels : Label Holders : Ticket Strips : Profiles : Board and Panel Profiles : Slatwall Inserts : Process : Materials Processed : Custom Extrusion : Beginners Guide