2 Part EPOS Label Holders / Ticket Strips

clear epos 2 part ticket strip for 2 sided viewing and for barcode scanning of internal label

This page details 2 part epos ticket strips that allow the enclosed label or ticket to be viewed from both sides. The base plate can have clips or legs for specific surface or shelf edge attachment, or have self adhesive tape applied. Although the 2 parts are extruded separately, they can be supplied assembled for easy installation.

Epos strips are generally extruded in clear rigid PVC, which gives good clarity, is cost-effective and is suitable for regular re-use. For greater clarity, where cosmetic appearance is more important, PETG is recommended, although this is generally more expensive to extrude than PVC. Please refer to ourĀ Materials Processed page for more details or contact us with Ticket Strip enquiries.

ForĀ flat/curved, open or epos label holders please click through.

Please note that none of the sections listed below are held in stock - they are made to order, and subject to minimum order quantity. If you do not see the exact sizes or styles you require we can design and manufacture tooling for you and would be pleased to quote for this. Profiles have been summarised as far as is possible - samples are often available and drawings can be viewed (also below) for more information.

Ref Label (mm) Wall (mm) Description (** drawing below table)
TP05 1816 15 1 Mounting plate for TP05 1817, has legs and epos holder also **
TP05 1686 16 1 Mounting plate for TP05 1685, has legs and epos holder also **
TP05 1471 16 1 Mounting leg, needs TP05 1468 mounting plate **
TP05 1468 -- 1 Mounting plate for TP05 1471 **
TP05 1768 19 1 Mounting plate for TP05 1769, has legs and epos holder also **
TP05 1817 20 1 Mounting leg, needs TP05 1816 mounting plate **
TP05 1812 23 1 Mounting plate for TP05 1811, has legs and epos holder also **
TP05 1775 25 1 Mounting plate for TP05 1776, has legs and 60 degree bent epos holder also **
TP05 1685 30 1 Mounting leg, needs TP05 1686 mounting plate **
TP05 1776 34 1 60 degree bent epos with mounting leg, needs TP05 1775 mounting plate **
TP05 1811 35 1 Mounting leg, needs TP05 1812 mounting plate **
TP05 1950 35 1 Mounting leg
TP05 1769 36 1 Mounting leg, needs TP05 1768 mounting plate **
TP05 1949 43 1 Mounting leg

Click on a thumbnail image for a larger version:

  • mounting plate for 2 part epos label holder
    TP05 1468
  • double sided epos label holder for 16mm label
    TP05 1471
  • mounting plate with legs and price holder
    TP05 1816
  • double sided epos ticket strip for 20mm label
    TP05 1817
  • double sided point of sale label holder for 30mm ticket
    TP05 1685
  • mounting plate with legs and ticket holder for 16mm label
    TP05 1686
  • mounting plate with legs and 19mm label holder
    TP05 1768
  • double sided point of sale ticket strip for 36mm label
    TP05 1769
  • curved double sided price holder for point of sale use
    TP05 1811
  • mounting plate with legs and 23mm ticket holder
    TP05 1812
  • mounting plate with angled 25mm label holder for EPOS
    TP05 1775
  • angled double sided EPOS 34mm label holder
    TP05 1776
 
© TP Extrusions Ltd :: Plastic and PVC Extrusion Company. Co Reg: #5443200 (England). Privacy / Site Map / Contact
Unit 1D Meadway Court, Rutherford Close, Meadway Technology Park, Stevenage, SG1 2EF. Registered Office: 2nd Floor, 2 Walsworth Road, Hitchin, SG4 9SP

home : About Us : Products : Angles : Tubes : Multi-Cavity Planking : Flat Strips : Furniture Profiles : Poster Hangers : Channels : Label Holders : Ticket Strips : Profiles : Board and Panel Profiles : Slatwall Inserts : Process : Materials Processed : Custom Extrusion : Beginners Guide